To purchase this with no extra fees and get an instant download, head to our website: https://dangerousladies.ca/collections/3d-print-files

Dangerous Ladies' 3D models for She-Ra's Sword of Protection.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed, with internal keys for strength and alignment. Includes files for both a hollow version in which the blade is hollow and the handle has a compartment for electronics and a solid version which has a solid blade and solid handle. Sword is approximately 40" long when finished! Big baby!

The hollow version's handle assembles on a 8.5" dowel (1/2") and has a number of alignment pegs for the handle. The blade has tiny ridges to help with assembly but these are very fine and finicky; it's very cool to make the hollow version but it does take a fair bit more of care in assembly and it is not as strong as the solid version. We strongly recommend coating the blade with a clear epoxy finish like XTC3D to give the blade extra strength and protect the tiny seams.

The solid version assembles on a 37" dowel (1/2") and uses two 25.5" dowels (1/4") for secondary alignment/support. As the blade pieces are keyed, these smaller dowels aren't super necessary but do increase its internal strength.

Files include:
- Photos
- .STL files

We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. We suggest the hollow version's blade pieces be printed at 100% infill or with 3mm walls.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.